Aoc A42W64AT4 Manual de usuario descargar pdf (Pagina 10)

INPUT CONNECTION OF PC SIGNAL(PC/DVD)

Notice: If you see that display abnormality in screen, you need to check the cable

connection and DVD setup.

● D-SUB 15 Pin:

Connect D-SUB signal cable（VGA cable）from PC to D-SUB jack at the back of this display.

And connect the earphone cable from PC earphone output jack to AUDIO input jack near to the

D-SUB jack.

Setup:

Use the key “Digital”in Remote Control Transmitter or “MODE”key on Front panel controls

to select source to “VGA”state. Then turn on the PC.

● DVI-D:

Connect DVI-D 24 Pin signal cable（TMDS cable）from equipment with DVI-D jack to the back

of this display. And connect earphone cable from equipment with earphone output jack to

AUDIO input jack near the DVI-D jack.

Setup:

Use the key “Digital”in Remote Control Transmitter or “MODE”key on Front panel controls

to select source to “DVI”state. Then turn on the equipment.

We have 2 component signal input

acks: Y Cb Cr and Y Pb Pr. The R / L is

Audio input for every Y Cb Cr and Y Pb Pr.

If your DVD or Set Top Box have Y Cb

Cr or Y Pb Pr output, you can connect it to

Y Cb Cr or Y Pb Pr input jack. And select to

Y Cb Cr or Y Pb Pr source input. （Some

DVD or Set Top Box need to set to Y Cb C

or Y Pb Pr output）

Notice: If you see that display abnormality

in screen, you need to check the cable

connection and DVD setup.

24PIN DVI R/L INPUT 15PIN DVI R/L INPUT

▲ Notice: The PC output can not set out of

range.The highest resolution input is

1280 X 1024 / 60Hz.

Some PC models cannot be connected to

the set.

Connection to other equipment

G B R R W

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Sin comentarios

Aoc A42W64AT4 Manual de usuario Pagina 10